|  |
ADC-44 Series
|
| |
| | FAMILY MODELS |
| | ADC-44 | ADC-44 |
| | Hot Temp | Chemical |
| NSF Rated Capacity (racks/hr) | 244 | 244 |
| Conveyor Speed | 6.8 ft/min | 6.8 ft/min |
| Water Consumption (per cycle) | .49 Gal | .49 Gal |
| | 1.8 Liters | 1.8 Liters |
| Total Gallons Per Hr. | 120 | 120 |
| | 454.2 Liters | 454.2 Liters |
| Final Rinse Temp | 180°F | 120°F |
| Sanitizer | 180° Water | 50ppm Chlorine |
| Electrical Power Supply | 208/240V, 4PH, 60 AMP, 60 HZ |
| 3 Phase installation requires 6 gauge wires, a suitable ground and a clean circuit. |
| | 1 PH, 50/60 AMP, 60 HZ |
| 1 Phase installation requires one(1) 50 Amp service using 8 gauge wires with a 10 gauge neutral wire, and one(1) 60 Amp service using 6 gauge wires and a suitable ground, both on clean circuits. |
| Motor Ratings | 3 HP Wash, 1/3 HP Rinse |
| | 1/3 HP Conveyor |
| Heater Ratings | 12KW Wash, 2.25KW Rinse |
| Rack Size | 19 3/4" X 19 3/4" |
| | 50.2 cm X 50.2 cm |
| Door Clearance | 15" X 24 1/2" |
| | 38.1 cm X 62.2 cm |
| Rack Clearance | 19 1/4" X 20 3/4" |
| | 48.9 cm X 52.7 cm |
| Water Inlet | 3/4" F.P.T. |
| Drain (Scrap trap) | 2" Pipe |
| Height | 73 3/4" |
| | 187.3 cm |
| Width (Overall) | 64" |
| | 162.5 cm |
| Width (Table to Table) | 44" |
| | 111.7 cm |
| Depth | 30" |
| | 76.2 cm |
| Shipping Weight | 760 lb. |
| | 344.7 kg. |
| Shipping Volume | 117 cu. ft. |
| | 3.31 cu. meters |
|
- Auto-Fill
- Energy Saving Stage Washer
- No Circuit Boards
- 360 Sq. In. of Washing Action
- High Capacity Heaters
- Wide Open Access Doors with Safety Interlock
- Skirted Motor Compartment
- Heavy Stainless Steel Const.
- No Operator Controls
- Low Water Consumption
- Quiet Operation
- 244 Racks Per Hour
- Auto Cut-off
- Self-Purging
- 11 Gallon Wash Tank
- 3HP Wash Pump
- Dual Rinsing System
View the PDF document
for the ADC-44 Series Dish Machine
PDF contains schematic
|
|
|
|
